The DJI Avata Propeller Guard is the full-coverage protection accessory for the original DJI Avata (first-generation, 2022). It adds a ducted, aerodynamically tuned ring around the propellers that significantly extends the protection of the airframe's stock guards, making the Avata far more forgiving in tight indoor spaces, training environments, and close-proximity flying. The package includes the guard frame, a matched pair of landing gear, and the screws to install everything. Total added weight is approximately 49.5 g.

Full-coverage ducted propeller guard for the original DJI Avata. Adds rigorous indoor and close-quarters protection while preserving flight characteristics. Includes matched landing gear.

Features

• Genuine DJI accessory designed for the original Avata's airframe, replacing the standard landing gear with a matched landing-gear-plus-guard assembly
• Ducted aerodynamic design routes airflow cleanly through the guard, preserving the Avata's published flight feel rather than introducing prop wash or instability around the blades
• Extends propeller protection beyond the airframe's built-in partial guards, useful for indoor flying, flight training, FPV proximity work, and any environment where prop strikes are a real risk
• Compact footprint at 180 × 180 × 41.5 mm and lightweight at approximately 49.5 g, so the impact on flight time is small in absolute terms
• Complete installation hardware included in the package: matched landing gear, eight M2 × 4.3 screws, two M1.6 × 5 screws, and two M2 × 6.3 screws

Specifications

Who this is for

• Original DJI Avata pilots who fly indoors, in tight spaces, or near walls, ceilings, and other surfaces where the stock partial guards aren't enough
• Flight schools and training programs using the Avata to teach FPV fundamentals, where a fully guarded airframe lowers the cost of student mistakes
• Real-estate, retail, and indoor cinematography pilots who need a quieter, more forgiving aircraft for walkthroughs and reveal shots in occupied spaces
• Public-safety operators using the Avata for indoor reconnaissance, hostage and barricade scenarios, or building clearance where contact with surfaces is expected
• Inspectors flying inside tanks, ducts, attics, crawl spaces, or other enclosed environments where the integrated guards alone leave the propellers exposed

What's included

• 1 × DJI Avata Propeller Guard
• 2 × Landing gear
• 8 × M2 × 4.3 screws
• 2 × M1.6 × 5 screws
• 2 × M2 × 6.3 screws

Installation and operational notes

• Installing the propeller guard requires removing the Avata's stock landing gear and replacing it with the matched pair supplied in this package. Follow the procedure in the DJI Avata user manual or the guard's installation card.
• Use the screw sizes as specified: M2 × 4.3 for the main mounts, M1.6 × 5 and M2 × 6.3 for the landing gear interface. Mixing screw sizes can strip the threads or fail to seat the assembly correctly.
• Verify that all screws are seated and snug before flight, but do not over-tighten — the threads on the Avata's airframe are short and over-torquing can damage them.
• Recalibrate the aircraft and confirm flight handling at low altitude before committing to a longer flight, especially indoors. The guard slightly changes the aircraft's mass and drag characteristics.
• Plan on a small reduction in flight time and a slightly tighter wind-resistance margin compared to flights without the guard. The 49.5 g of added weight is modest but real.
• Inspect the guard before every flight. Cracked or warped sections can interact with the propellers and create their own failure mode. Replace the guard if it shows visible damage from prior strikes.

Please note: This accessory is built specifically for the original DJI Avata (first-generation, released 2022). It is not compatible with the DJI Avata 2 (second-generation, 2024), which has redesigned integrated prop guards and a different airframe. Verify your aircraft model before ordering — the two aircraft look similar but the propeller guard does not transfer between them.

Under FAA Part 107, operations using first-person view require either a Visual Observer who maintains visual line of sight on the aircraft, or an FAA waiver from 14 CFR 107.31. The propeller guard is hardware and does not change those rules; it does, however, make many indoor and close-quarters operations more practical by reducing the risk of a single contact ending the mission. Confirm your operating authorization and aircraft configuration before flight.

FAQ